Difference between revisions of "Screwduino"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "..") |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | .. | + | [[File:ScrewduinoX4-5493-1365x663px.jpg]] |
| + | |||
| + | == Features == | ||
| + | |||
| + | * Arduino UNO Compatible (Arduino bootloader) | ||
| + | * ICSP header for program download | ||
| + | * Standard 6-pin FTDI connector | ||
| + | * 4-pin I2C connector | ||
| + | * Reset switch | ||
| + | * Other than power regulator only uses through-hole parts | ||
| + | * 5mm pitch screw terminal blocks | ||
| + | * Four (4) 4-40 mounting holes with clearance for screw heads, standoffs and/or nuts | ||
| + | * 7-12V DC on standard 2.1mm DC power connector | ||
| + | * Power selection jumper (FTDI, Regulator, Screw Terminals) | ||
Revision as of 00:04, 30 December 2019
Features
- Arduino UNO Compatible (Arduino bootloader)
- ICSP header for program download
- Standard 6-pin FTDI connector
- 4-pin I2C connector
- Reset switch
- Other than power regulator only uses through-hole parts
- 5mm pitch screw terminal blocks
- Four (4) 4-40 mounting holes with clearance for screw heads, standoffs and/or nuts
- 7-12V DC on standard 2.1mm DC power connector
- Power selection jumper (FTDI, Regulator, Screw Terminals)
