Difference between revisions of "Screwduino Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "File:ScrewduinoX4PlotBW.PNG == Parts List == {| class="wikitable" !Image !Desc !Qty !Ref Des |- | |Header, 6-pin rt angle |1 |JP1 |- | |5V reg AZ1117EH-5.0TRG1 |1 |...") |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | [[File: | + | [[File:ScrewduinoX6PlotBW.PNG]] |
== Parts List == | == Parts List == | ||
Revision as of 19:50, 14 July 2021
Parts List
| Image | Desc | Qty | Ref Des |
|---|---|---|---|
| Header, 6-pin rt angle | 1 | JP1 | |
| 5V reg AZ1117EH-5.0TRG1 | 1 | U2 | |
| 28-pin socket | 1 | U1 | |
| 0.1uF cap RDER71H104K0P1H03B | 7 | C1,C3,C5-C9 | |
| 1N4004 | 1 | D1 | |
| Resistor, 10K, 1/4W | 1 | R1 | |
| Resistor, 10K, 1/4W (Install for I2C) | 2 | R2-R3 | |
| Switch, Pushbutton | 1 | SW1 | |
| Header, 1x3-pins | 1 | JP2 | |
| Header, 3x2 pins | 1 | JP3 | |
| Header, 1x4-pins | 1 | JP8 | |
| 16MHz resonator, CSTLS16M0X53-B0 | 1 | X1 | |
| Terminal blocks, 2-pin, 5mm | 16 | JP4-JP7 | |
| DC JACK-5.5mm X 2.1mm | 1 | K1 | |
| Capacitor, 10uF or 47uF - observe polarity | 2 | C2,C4 | |
| Install ATMEGA328-P in socket | 1 | U1 |
