Difference between revisions of "Slew Rate Controller on ER-PROTO-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 9: | Line 9: | ||
* Power: +12V @ 5mA, -12V @ 5mA | * Power: +12V @ 5mA, -12V @ 5mA | ||
− | == Credits === | + | === Credits === |
* [https://github.com/hires/Dintree/tree/master/D107-Slew Dintree D107-Slew] | * [https://github.com/hires/Dintree/tree/master/D107-Slew Dintree D107-Slew] | ||
* [https://github.com/hires/Dintree/blob/master/D107-Slew/D107-dual_slew-schematic.pdf Schematic] | * [https://github.com/hires/Dintree/blob/master/D107-Slew/D107-dual_slew-schematic.pdf Schematic] | ||
+ | |||
+ | == Jacks/Controls == | ||
+ | |||
+ | * 2 Slew Rate adjustment Pots | ||
+ | * 4 Jacks | ||
+ | ** 2 Input jacks | ||
+ | ** 2 Output jacks | ||
== Video == | == Video == | ||
[https://www.youtube.com/watch?v=6EZQ2UXpn6g Video] | [https://www.youtube.com/watch?v=6EZQ2UXpn6g Video] |
Revision as of 18:32, 12 November 2022
Contents
Features
- Simple dual slew rate limiter
- Used for portamento effects or to smooth out a stepped voltage from a sequencer, or for general audio or CV smoothing
- Each channel contains a buffer with 100K input impedance suitable for pitch CVs
- The slew pot affects the charging of a large capacitor connected to a second amplifier
- The second amp provides buffering for output to isolate the output jack from the actual slewing function
- Control range of 0-10s (approx.)
- Power: +12V @ 5mA, -12V @ 5mA
Credits
Jacks/Controls
- 2 Slew Rate adjustment Pots
- 4 Jacks
- 2 Input jacks
- 2 Output jacks