Difference between revisions of "TinyGrid85"

From Land Boards Wiki
Jump to navigation Jump to search
Line 18: Line 18:
 
* (4) 4-40 or M3 screw holes for solid mounting
 
* (4) 4-40 or M3 screw holes for solid mounting
 
* 49x49 mm board
 
* 49x49 mm board
 +
 +
== Connectors ==
 +
 +
=== H1 - VREG Jumper ===
 +
 +
* Install to power board from the on-board regulator
 +
* Remove when connecting powered ISP cable
 +
 +
=== H2 - ISP Connector ===
 +
 +
[[File:Tiny85-ISP-Conn.PNG]]
 +
 +
* Program using an Arduino UNO running ArduinoISP.
 +
 +
[[File:ATtiny45-85.png]]
  
 
== Assembly Sheet ==
 
== Assembly Sheet ==
  
 
* [[TinyGrid85 Assembly Sheet]]
 
* [[TinyGrid85 Assembly Sheet]]

Revision as of 12:02, 27 January 2020

Tindie-mediums.png

TinyGrid85-GVS-640px.JPG

Features

  • ATMEL ATTiny85 Microprocessor (or compatible 8-pin part)
  • Arduino Compatible (works with Arduino bootloader and Arduino IDE)
  • Prototyping area with power/ground connections
  • Brings out all 5 I/O and reset lines to grid columns
  • Laid out like a breadboard with vertically connected traces.
  • Power and Ground horizontal connections though all columns
  • Labeled (with letters/numbers) for easy documentation
  • H1 - Install jumper to select regulator or remove for ISP +5V
  • H2 - 6-pin ISP Download Header
  • 5V Power Regulator with generous area under the regulator for heat dissipation
  • 2.1mm Connector for AC/DC adapter 7-9V input
  • (4) 4-40 or M3 screw holes for solid mounting
  • 49x49 mm board

Connectors

H1 - VREG Jumper

  • Install to power board from the on-board regulator
  • Remove when connecting powered ISP cable

H2 - ISP Connector

Tiny85-ISP-Conn.PNG

  • Program using an Arduino UNO running ArduinoISP.

ATtiny45-85.png

Assembly Sheet