Difference between revisions of "TinyGrid85"

From Land Boards Wiki
Jump to navigation Jump to search
Line 1: Line 1:
 +
[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/attiny85-board-with-prototyping-area-tinygrid85/]]
 +
 
[[File:TinyGrid85-GVS-640px.JPG]]
 
[[File:TinyGrid85-GVS-640px.JPG]]
  

Revision as of 23:32, 29 December 2019

Tindie-mediums.png

TinyGrid85-GVS-640px.JPG

Features

  • ATMEL ATTiny85 Microprocessor (or compatible 8-pin part)
  • Arduino Compatible (works with Arduino bootloader and Arduino IDE)
  • Prototyping area with power/ground connections
  • Brings out all 5 I/O and reset lines to grid columns
  • Laid out like a breadboard with vertically connected traces.
  • Power and Ground horizontal connections though all columns
  • Labeled (with letters/numbers) for easy documentation
  • H1 - Install jumper to select regulator or remove for ISP +5V
  • H2 - 6-pin ISP Download Header
  • 5V Power Regulator with generous area under the regulator for heat dissipation
  • 2.1mm Connector for AC/DC adapter 7-9V input
  • (4) 4-40 or M3 screw holes for solid mounting
  • 49x49 mm board

Assembly Sheet