Difference between revisions of "VFO-003 Assembly Sheet - Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→PL) |
Blwikiadmin (talk | contribs) (→PL) |
||
| Line 85: | Line 85: | ||
|- | |- | ||
| 1 | | 1 | ||
| − | | ARDUPROMINI-3.3V | + | | ARDUPROMINI-3.3V (Note 2) |
| U1 | | U1 | ||
| | | | ||
Revision as of 19:31, 10 October 2021
PL
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 7 | 0.1uF | C2-C8 (0805) | 3 | SMA-F (OPT) | J9-J11 | |
| 1 | 10uF | C1 (1206) | 3 | BNC (OPT) | P1-P3 | |
| 9 | 150 | R7-R9,R12-R17 | 1 | Conn, Strt, 1x2 | J6 | |
| 3 | 1K | R4-R6 | 1 | Conn, Strt, 1x6 | J4 | |
| 5 | 2.2K | R1-R3,R10,R11 | 3 | Conn, 1x8 | J2,J3,J8 | |
| 2 | 74AC14 | U4,U5 | 1 | Conn, 1x10 | J5 | |
| 1 | Si5351A | U3 | 1 | Conn, 2x3 | J7 | |
| 1 | ASE-xxxMHz | X1 | 1 | DCJ0202 | J99 | |
| 1 | MINI-360 (Note 1) | BRD1 | 2 | Rotary_Encoder_Switch | SW1 OR SW2 | |
| 1 | ARDUPROMINI-3.3V (Note 2) | U1 | 1 | OLED_I2C | J1 |
Notes
- Mini360 gets installed with the inductor towards the edge of the card (output side)
