Difference between revisions of "XIAO ESP32C3"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
== Features == | == Features == | ||
| − | * [https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html?utm_source=mailchimp&utm_medium=edm&utm_campaign=bazaar_0707&ct=t%28%29&mc_cid=3303ccf0f9&mc_eid=e1825627f2 SeeedStudio XIAO ESP32C3] (New 2022-07) | + | * [https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html?utm_source=mailchimp&utm_medium=edm&utm_campaign=bazaar_0707&ct=t%28%29&mc_cid=3303ccf0f9&mc_eid=e1825627f2 SeeedStudio XIAO ESP32C3 Product Page] (New 2022-07) |
| − | * RISC-V Single Core | + | * [https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/ Wiki] |
| + | * [https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/esp32-c3_datasheet.pdf?ct=t()&mc_cid=87cf985ac5&mc_eid=1dd4876369 ESP32C3 Datasheet] | ||
| + | * 32-bit RISC-V | ||
| + | * Single Core | ||
* Up to 160 MHz | * Up to 160 MHz | ||
* 400 KB SRAM | * 400 KB SRAM | ||
* 4 MB Flash | * 4 MB Flash | ||
* 2.4GHz Wi-Fi subsystem | * 2.4GHz Wi-Fi subsystem | ||
| − | * | + | ** U.FL antenna provided that supports WiFi/Bluetooth connection over 100m |
| − | * | + | ** Supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode |
| + | * 21 x 17.5mm overall dimension | ||
| + | * 44 μA (deep sleep mode), with 4 working modes available | ||
* 11 GPIO pins: | * 11 GPIO pins: | ||
** True analog output on one I/O pin | ** True analog output on one I/O pin | ||
*** Can be used to play 10-bit quality audio clips in Arduino | *** Can be used to play 10-bit quality audio clips in Arduino | ||
**** CircuitPython does not have storage for audio clips | **** CircuitPython does not have storage for audio clips | ||
| − | ** | + | ** 4 x 12-bit analog inputs (SDA/SCL do not have analog inputs) |
** 1 x Optional AREF on A1 | ** 1 x Optional AREF on A1 | ||
** 9 x PWM outputs (A0 is analog out, A1 is not PWM capable) | ** 9 x PWM outputs (A0 is analog out, A1 is not PWM capable) | ||
| Line 20: | Line 25: | ||
** Hardware SPI | ** Hardware SPI | ||
** Hardware I2S | ** Hardware I2S | ||
| − | |||
* 3.3V regulator with [https://www.diodes.com/assets/Datasheets/AP2112.pdf AP2112, 600mA peak output] | * 3.3V regulator with [https://www.diodes.com/assets/Datasheets/AP2112.pdf AP2112, 600mA peak output] | ||
* Reset switch for starting your project code over or entering bootloader mode | * Reset switch for starting your project code over or entering bootloader mode | ||
* USB Type C connector | * USB Type C connector | ||
| + | |||
| + | == Pinout == | ||
| + | |||
| + | [[file:ESP32C3_pin_map_720px.png]] | ||
Revision as of 12:54, 8 July 2022
Features
- SeeedStudio XIAO ESP32C3 Product Page (New 2022-07)
- Wiki
- ESP32C3 Datasheet
- 32-bit RISC-V
- Single Core
- Up to 160 MHz
- 400 KB SRAM
- 4 MB Flash
- 2.4GHz Wi-Fi subsystem
- U.FL antenna provided that supports WiFi/Bluetooth connection over 100m
- Supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode
- 21 x 17.5mm overall dimension
- 44 μA (deep sleep mode), with 4 working modes available
- 11 GPIO pins:
- True analog output on one I/O pin
- Can be used to play 10-bit quality audio clips in Arduino
- CircuitPython does not have storage for audio clips
- Can be used to play 10-bit quality audio clips in Arduino
- 4 x 12-bit analog inputs (SDA/SCL do not have analog inputs)
- 1 x Optional AREF on A1
- 9 x PWM outputs (A0 is analog out, A1 is not PWM capable)
- Hardware I2C port with STEMMA QT plug-n-play connector
- Hardware UART
- Hardware SPI
- Hardware I2S
- True analog output on one I/O pin
- 3.3V regulator with AP2112, 600mA peak output
- Reset switch for starting your project code over or entering bootloader mode
- USB Type C connector
Pinout
