Difference between revisions of "XIAO ESP32C3"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "== Features == * [https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html?utm_source=mailchimp&utm_medium=edm&utm_campaign=bazaar_0707&ct=t%28%29&mc_cid=3303ccf0f9&mc_eid=...") |
Blwikiadmin (talk | contribs) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
| + | [[file:ESP32C3_card.png]] | ||
| + | |||
== Features == | == Features == | ||
| − | * [https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html?utm_source=mailchimp&utm_medium=edm&utm_campaign=bazaar_0707&ct=t%28%29&mc_cid=3303ccf0f9&mc_eid=e1825627f2 SeeedStudio XIAO ESP32C3] (New 2022-07) | + | * [https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html?utm_source=mailchimp&utm_medium=edm&utm_campaign=bazaar_0707&ct=t%28%29&mc_cid=3303ccf0f9&mc_eid=e1825627f2 SeeedStudio XIAO ESP32C3 Product Page] (New 2022-07) |
| − | * RISC-V Single Core | + | * [https://wiki.seeedstudio.com/XIAO_ESP32C3_Getting_Started/ Wiki] |
| + | * [https://files.seeedstudio.com/wiki/Seeed-Studio-XIAO-ESP32/esp32-c3_datasheet.pdf?ct=t()&mc_cid=87cf985ac5&mc_eid=1dd4876369 ESP32C3 Datasheet] | ||
| + | * 32-bit RISC-V | ||
| + | * Single Core | ||
| + | * Floating Point Unit | ||
* Up to 160 MHz | * Up to 160 MHz | ||
* 400 KB SRAM | * 400 KB SRAM | ||
* 4 MB Flash | * 4 MB Flash | ||
* 2.4GHz Wi-Fi subsystem | * 2.4GHz Wi-Fi subsystem | ||
| − | * | + | ** U.FL antenna provided that supports WiFi/Bluetooth connection over 100m |
| − | * | + | ** Supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode |
| + | * 21 x 17.5mm overall dimension | ||
| + | * 44 μA (deep sleep mode), with 4 working modes available | ||
| + | * 11 GPIO pins: | ||
| + | ** 4 x 12-bit analog inputs | ||
| + | ** 11 x PWM outputs | ||
| + | ** Hardware I2C port | ||
| + | ** Hardware UART | ||
| + | ** Hardware SPI | ||
| + | ** Hardware I2S | ||
| + | * Arduino support - add to File > Preferences, and fill "Additional Boards Manager URLs" | ||
| + | ** https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_dev_index.json | ||
| + | * 3.3V regulator, you can draw 700mA | ||
| + | * LiPo charger (pads on bottom) | ||
| + | * Reset switch for starting your project code over or entering bootloader mode | ||
| + | * USB Type C connector | ||
| + | |||
| + | == Pinout == | ||
| + | |||
| + | [[file:ESP32C3_pin_map_720px.png]] | ||
Latest revision as of 13:46, 8 July 2022
Features
- SeeedStudio XIAO ESP32C3 Product Page (New 2022-07)
- Wiki
- ESP32C3 Datasheet
- 32-bit RISC-V
- Single Core
- Floating Point Unit
- Up to 160 MHz
- 400 KB SRAM
- 4 MB Flash
- 2.4GHz Wi-Fi subsystem
- U.FL antenna provided that supports WiFi/Bluetooth connection over 100m
- Supports Station mode, SoftAP mode, SoftAP & Station mode, and promiscuous mode
- 21 x 17.5mm overall dimension
- 44 μA (deep sleep mode), with 4 working modes available
- 11 GPIO pins:
- 4 x 12-bit analog inputs
- 11 x PWM outputs
- Hardware I2C port
- Hardware UART
- Hardware SPI
- Hardware I2S
- Arduino support - add to File > Preferences, and fill "Additional Boards Manager URLs"
- 3.3V regulator, you can draw 700mA
- LiPo charger (pads on bottom)
- Reset switch for starting your project code over or entering bootloader mode
- USB Type C connector
Pinout
