Z80-MBC2 Build Notes

From Land Boards Wiki
Revision as of 15:30, 23 July 2021 by Blwikiadmin (talk | contribs)
Jump to navigation Jump to search
  • ebay - bare PCB $8
    • Arrived in a couple of days

Build Notes


Programming THE ATMEGA32

  • Was able to use ATProgHead running Arduino as ISP to burn bootloader but not program the code
  • Could not use any of my FTDI cards fir serial programming since the have RTS/CTS but not DTR
    • Most programmer setups in Arduino work just fine for serial, but not the
  • Used TL866ii to program ATMEGA32 fuses
    • Reference: Setting AVR Fuse Bits
    • If you use the programmer defaults it sets the clock to 1 MHz which gives a serial port rate of 600 baud (told me I needed to fix the fuses).

Z80-MBC2 ATMEGA32 TL866I SETTINGS.jpg