Difference between revisions of "ArduinoInABox Assembly Instructions Rev 1"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 77: | Line 77: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | == Options == | ||
| + | |||
| + | * On-board output | ||
| + | ** P1-P3 are BNC connectors | ||
| + | ** Can use P4-P6 SMA instead | ||
| + | ** J4, J7 J8 connect | ||
| + | * Off-board output | ||
| + | ** Use [[DB25-02]] card for I/O | ||
| + | * Install J9 to use raw power from DC Jack | ||
| + | ** Don't install MINI-360 if J9 is used | ||
| + | * Install J6 is Mini360 is used | ||
| + | * Adjust output voltage before installing J6 shunt | ||
Revision as of 17:18, 26 April 2022
Parts List
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 7 | 0.1uF (0805) | C2-C8 | 4 | Header, Strt, 1x2 (opt) | J4,J7,J8 | |
| 1 | 10uF (1206) | C1 | 2 | Header, Rt Ang, 1x2 | J6, J9 | |
| 2 | Ferrite Bead (0805) | L1, L2 | 2 | Header, 1x8 (opt) | J2, J3 | |
| 5 | 10K (0805) | R1-R3, R10, R11 | 1 | Header, Strt, 2x13 | J5 | |
| 1 | ARDUINO PRO MINI 3.3V OR 5V | U1 | 1 | DCJ0202 | J99 | |
| 1 | MINI-360 | BRD1 | 3 | BNC (opt) | P1-P3 | |
| 1 | OLED_I2C | J1 | 3 | SMA (opt) | P4-P6 | |
| 1 | Switch, Rotary Encoder | SW1 or SW2 |
Options
- On-board output
- P1-P3 are BNC connectors
- Can use P4-P6 SMA instead
- J4, J7 J8 connect
- Off-board output
- Use DB25-02 card for I/O
- Install J9 to use raw power from DC Jack
- Don't install MINI-360 if J9 is used
- Install J6 is Mini360 is used
- Adjust output voltage before installing J6 shunt
