Difference between revisions of "I2C-RPT"

Revision as of 23:46, 29 December 2019

I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer
Four I2C Ports
Host port Controlled via I2C
PCA9544A IC Multiple vendors
3.3V or 5V host operation
3.3V or 5V slave ports operation
Voltage translation between the ports
Example: A Raspberry PI which runs 3.3V can control an I2C device which runs at 5V
Interrupt line on each channel and host
100KHz/400KHz operation
On-board termination resistors
49x49mm form factor
4 solid 4-40 mounting holes
Arduino driver and example code
Raspberry Pi example code

Revision as of 22:10, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) (Created page with "File:I2C-RPT-01-X2-CCA_6031-640px.jpg == Features == * I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer * Four I2C Ports * Host port Controlled via I2C * P...")		Revision as of 23:46, 29 December 2019 (view source) Blwikiadmin (talk \| contribs) Newer edit →
Line 1:		Line 1:
		+	[[File:tindie-mediums.png\|link=https://www.tindie.com/products/land_boards/4-channel-i2c-multiplexer-i2c-rpt-01/]]
		+
	[[File:I2C-RPT-01-X2-CCA_6031-640px.jpg]]		[[File:I2C-RPT-01-X2-CCA_6031-640px.jpg]]