Difference between revisions of "LEDS-SWITCHES"

Latest revision as of 12:08, 20 July 2021

Vcc and Ground are independent (not connected between connectors)
- Need to add wires if you want shared Vcc or Ground with fewer connection to the master

@@ Line 1: / Line 1: @@
+[[File:tindie-mediums.png|link=https://www.tindie.com/products/land_boards/switches-and-leds-pcb-only/]]
+[[File:LEDS-SWITCHES_P1404-720px.jpg]]
+== Features ==
+* 8 LEDs
+** 3mm or 5mm
+** Pick ballast resistor for
+*** Desired brightness
+*** Match operating voltage (3.3V or 5V typical)
+*** Vforward for particular LED
+*** Modern LEDs are very efficient, vintage LEDs are not efficient
+* 8 slide switches or headers
+* 8 pushbutton switches
+== Connectors ==
+* Vcc and Ground are independent (not connected between connectors)
+** Need to add wires if you want shared Vcc or Ground with fewer connection to the master
+=== J2 - Slide Switches ===
+* 1x12 header
+[[File:J2.PNG]]
+=== J3 - Pushbuttons ===
+* 1x12 header
+[[File:J3.PNG]]
+=== J4 - LEDs ===
+* 1x10 header
+[[File:J4.PNG]]
 == Assembly Sheet ==
 [[LEDS-SWITCHES Assembly Sheet Rev 1]]