LEDS-SWITCHES

From Land Boards Wiki
Jump to navigation Jump to search

Tindie-mediums.png

LEDS-SWITCHES P1404-720px.jpg

Features[edit]

  • 8 LEDs
    • 3mm or 5mm
    • Pick ballast resistor for
      • Desired brightness
      • Match operating voltage (3.3V or 5V typical)
      • Vforward for particular LED
      • Modern LEDs are very efficient, vintage LEDs are not efficient
  • 8 slide switches or headers
  • 8 pushbutton switches

Connectors[edit]

  • Vcc and Ground are independent (not connected between connectors)
    • Need to add wires if you want shared Vcc or Ground with fewer connection to the master

J2 - Slide Switches[edit]

  • 1x12 header

J2.PNG

J3 - Pushbuttons[edit]

  • 1x12 header

J3.PNG

J4 - LEDs[edit]

  • 1x10 header

J4.PNG

Assembly Sheet[edit]

LEDS-SWITCHES Assembly Sheet Rev 1