Difference between revisions of "SD CARD X49"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 11: | Line 11: | ||
* 49 x 49 mm ODAS foprm factor | * 49 x 49 mm ODAS foprm factor | ||
* (4) 4-40 mounting holes | * (4) 4-40 mounting holes | ||
| + | |||
| + | == Power Options == | ||
| + | |||
| + | * 3.3V Host | ||
| + | ** Wire power to 3.3V position | ||
| + | ** Install Jumper J3 | ||
| + | * 5V Host | ||
| + | ** Wire Power to 5V | ||
| + | ** Leave 3.3V open | ||
| + | ** Remove Jumper J3 | ||
== J1 pinout == | == J1 pinout == | ||
Revision as of 14:13, 7 August 2021
Contents
Features
- SD or SDHC card adapter
- 5V to 3.3V regulator
- 3.3V to 5V TXS0104E level shifter
- Activity LED
- 49 x 49 mm ODAS foprm factor
- (4) 4-40 mounting holes
Power Options
- 3.3V Host
- Wire power to 3.3V position
- Install Jumper J3
- 5V Host
- Wire Power to 5V
- Leave 3.3V open
- Remove Jumper J3
J1 pinout
- GND
- MISO
- SCLK
- MOSI
- SPI_SS
- CARD_DETECT (no pull-up)
- 3.3V out
- 5V in
Lock/Unlock
- Set switch to not locked position
Used with Z80_PSOC card
- PSOC Pins
- MISO - PSOC pin 76
- MOSI - PSOC pin 77
- SCLK - PSOC pin 78
- SPI_SS - PSOC pin 79
Z80_PSOC - H3 Connector
- GND
- +5V
- SPI_SS - PSOC pin 79
- SCLK - PSOC pin 78
- MOSI - PSOC pin 77
- MISO - PSOC pin 76
Mounting
Card Mounted in a Chassis
Mounted on ODAS Carrier Card
