Difference between revisions of "RPP-UIO-16"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 21: | Line 21: | ||
== Schematic == | == Schematic == | ||
| − | * [] | + | * [http://land-boards.com/RPP-UIO-16/RPP-UIO-16_Rev_X2_Schematic.pdf] |
== Assembly Sheet == | == Assembly Sheet == | ||
* [[RPP-UIO-16 Rev X2 Assembly Sheet]] | * [[RPP-UIO-16 Rev X2 Assembly Sheet]] | ||
Revision as of 15:42, 5 January 2020
Contents
Universal I/O Hat for the Raspberry Pi
Features
- All GPIO lines are connected to 3.3V GVS connectors
- 16 lines of 3.3V to 5V bidirectional GVS connections
- Hat EEPROM with write enable/protect jumper
- 5V Terminal block to power the Raspberry Pi and the I/O Card
- GPIO jumpers to connect up to 16 of the 3.3V GPIO lines to the 3.3V side of the voltage translators
