Difference between revisions of "JOYPAD"

From Land Boards Wiki
Jump to navigation Jump to search
Line 42: Line 42:
 
== Application Example ==
 
== Application Example ==
  
* [[PicoVGA01]] card with JOYPAD
+
* [[PicoVGA01]] card with Rev 1 JOYPAD
 
** JOYPAD configured as Atari Joystick
 
** JOYPAD configured as Atari Joystick
 
* Male-to-Female DB-9 1:1 cable
 
* Male-to-Female DB-9 1:1 cable

Revision as of 08:38, 21 August 2022

P1826-CROPPED-720PX.jpg

JOYPAD

  • 8 Pushbutton Switches
    • Up/Down/Left/Right/Center fire/3 others
  • Two build options
    • Build as 5 button Atari Joystick compatible pad
      • DB-9 female
    • Build as 8 button pad
      • 12 pin 0.1" pitch header, right angle, mounts on bottom of board
  • 49x49mm card
  • 4-40 mounting holes

Connectors

JOYPAD-CAD.png

J1 - 12-Pin connector

JOYPAD J1 HDR12.PNG

  • Right angle header on rear of card
  • Can use 1x10 header
    • Ignore pins 1, 12

JoyPad DB-9 REV2 REAR Header-3D.png

J2 - DB-9 connector

JOYPAD J2 DB-9M.PNG

  • Built as an Atari JoyStick with DB-9 Female mounted below board
  • Rev 1 board requires jumper wire

JOYPAD P18502-720pxV.jpg

DB-9 (Rev 2)

JOYPAD Rev2 P18578-720pxV.jpg

Application Example

  • PicoVGA01 card with Rev 1 JOYPAD
    • JOYPAD configured as Atari Joystick
  • Male-to-Female DB-9 1:1 cable

PicoVGA JOYPAD P18499-720px.jpg

Versions

Rev 2

  • Change soldermask color to Black
  • Moved DB-9 fire (pin 6) from Upper Right button to Fire button
  • Changed to DB-9 Female

JoyPad DB-9 REV2 FRONT.png

  • Moved pullup resistors to the rear of the card in center of pushbutton footprints
  • Shown with header for ribbon cable

JoyPad DB-9 REV2 REAR Header-3D.png

Rev 1

  • Works as-is

Assembly Sheet