Difference between revisions of "SYNTH-MIXER6-01"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→Rev 1) |
||
| Line 17: | Line 17: | ||
** Skip IN 1 holes | ** Skip IN 1 holes | ||
** Cut S/S trace J7 to RV7 | ** Cut S/S trace J7 to RV7 | ||
| + | ** Do not install R6 | ||
* Should have put the pots on the left and jacks on the right | * Should have put the pots on the left and jacks on the right | ||
Revision as of 00:22, 13 October 2022
6 Channel Mixer
- Eurorack 6HP
- Adapted from HAGIWO's 5 Channel Mixer Module
- Rear card is too tall to fit in rack between rails
- Try tilting it in?
- Views: Front (controls), Parts side, Front Panel
Issues
Rev 1
- Connector card is too big
- Cut off J1/RV1
- Skip IN 1 holes
- Cut S/S trace J7 to RV7
- Do not install R6
- Should have put the pots on the left and jacks on the right
