Difference between revisions of "Colpitts Crystal Oscillator"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| − | Useful for binning crystals | + | * Colpitts Crystal Oscillator |
| − | * | + | * Useful for binning crystals |
| + | * Design from [https://www.amazon.com/Experimental-Methods-Design-ARRL-Inc/dp/087259923X Experimental Methods in RF Design] | ||
| + | ** Built by others (W2AEW, IMSAIGuy, etc) | ||
| + | * Runs from 7V to 16V (may go higher, didn't tempt fate | ||
| + | * 15mA with 4.44 MHz crystal at 12V | ||
== Prototype == | == Prototype == | ||
Revision as of 16:52, 20 August 2021
- Colpitts Crystal Oscillator
- Useful for binning crystals
- Design from Experimental Methods in RF Design
- Built by others (W2AEW, IMSAIGuy, etc)
- Runs from 7V to 16V (may go higher, didn't tempt fate
- 15mA with 4.44 MHz crystal at 12V
Prototype
- Cut square PCB material for raised pads
- Build on single side Copper clad PCB material
- Large ground plane
Prototype Scope Caps
- UUT = 4.4433 MHz crystal
- Rigol DS1054Z - 59 MHz scope (100 MHz mod)
- UltraScope
- Double clock
- 8 Digits Frequency Counter shows 4.432298 MHz
W2AEW Video
- Wes Haywood EMIRFD cirvuit
PCB
