Difference between revisions of "SD CARD X49"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 61: | Line 61: | ||
== Testing == | == Testing == | ||
| + | * [https://www.arduino.cc/en/Tutorial/LibraryExamples/Listfiles Using the SD library to print the directory of files on SD card] | ||
* Arduino UNO card | * Arduino UNO card | ||
* GVS Shield | * GVS Shield | ||
* Cabling | * Cabling | ||
| + | ** 2x3 Dupont to D13/D12 and D11/D10 | ||
** 8 pin Dupont to SD card | ** 8 pin Dupont to SD card | ||
| − | + | ||
| − | + | # GND | |
| + | # MISO | ||
| + | # SCLK | ||
| + | # MOSI | ||
| + | # SPI_SS | ||
| + | # CARD_DETECT (no pull-up) | ||
| + | # 3.3V in/out | ||
| + | # 5V in (for 5V host only) | ||
== Mounting == | == Mounting == | ||
Revision as of 23:44, 19 September 2021
Contents
Features
- SD or SDHC card adapter
- 5V to 3.3V regulator
- 3.3V to 5V TXS0104E level shifter
- Activity LED
- 49 x 49 mm ODAS foprm factor
- (4) 4-40 mounting holes
Power Options
Important to properly set up the power option
- 3.3V Host
- Wire power to 3.3V position
- Install Jumper J3
- Leave 5V in pin open
- 5V Host
- Wire Power to 5V
- Leave 3.3V open
- Remove Jumper J3
J1 pinout
- GND
- MISO
- SCLK
- MOSI
- SPI_SS
- CARD_DETECT (no pull-up)
- 3.3V in/out
- 5V in (for 5V host only)
Lock/Unlock
- Set switch to not locked position
Used with Z80_PSOC card
- PSOC Pins
- MISO - PSOC pin 76
- MOSI - PSOC pin 77
- SCLK - PSOC pin 78
- SPI_SS - PSOC pin 79
Z80_PSOC - H3 Connector
- GND
- +5V
- SPI_SS - PSOC pin 79
- SCLK - PSOC pin 78
- MOSI - PSOC pin 77
- MISO - PSOC pin 76
Testing
- Using the SD library to print the directory of files on SD card
- Arduino UNO card
- GVS Shield
- Cabling
- 2x3 Dupont to D13/D12 and D11/D10
- 8 pin Dupont to SD card
- GND
- MISO
- SCLK
- MOSI
- SPI_SS
- CARD_DETECT (no pull-up)
- 3.3V in/out
- 5V in (for 5V host only)
Mounting
Card Mounted in a Chassis
Mounted on ODAS Carrier Card
