Difference between revisions of "JOYPAD"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 26: | Line 26: | ||
[[file:JOYPAD_J2_DB-9M.PNG]] | [[file:JOYPAD_J2_DB-9M.PNG]] | ||
| + | |||
| + | [[file:JOYPAD_P18502-720pxV.jpg]] | ||
== 3D Image with DB-9 (Rev 1) == | == 3D Image with DB-9 (Rev 1) == | ||
Revision as of 18:17, 2 August 2022
Contents
JOYPAD
- 8 Pushbutton Switches
- Up/Down/Left/Right/Center fire/3 others
- Connectors
- DB-9 Atari Joystick compatible
- 12 pin 0.1" pitch header, right angle, mounts on bottom of board
- 49x49mm card
- 4-40 mounting holes
Connectors
J1 - 12-Pin connector
- Right angle header on rear of card
J2 - DB-9 connector
3D Image with DB-9 (Rev 1)
Application Example
- PicoVGA01 card with JOYPAD
- JOYPAD configured as Atari Joystick
- Male-to-Female DB-9 1:1 cable
Versions
Rev 2
- Change soldermask color to Black
- Moved DB-9 fire (pin 6) from Upper Right button to Fire button
- Changed to DB-9 Female
- Moved pullup resistors to the rear of the card in center of pushbutton footprints
- Shown with header for ribbon cable
Rev 1
- Works as-is
