Difference between revisions of "JOYPAD"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) (→JOYPAD) |
||
| Line 5: | Line 5: | ||
* 8 Pushbutton Switches | * 8 Pushbutton Switches | ||
** Up/Down/Left/Right/Center fire/3 others | ** Up/Down/Left/Right/Center fire/3 others | ||
| − | * | + | * Two build options |
| − | ** | + | ** Build as either 5 button [https://en.wikipedia.org/wiki/Atari_joystick_port Atari Joystick compatible pad] |
| − | ** 12 pin 0.1" pitch header, right angle, mounts on bottom of board | + | *** DB-9 |
| + | ** Build as 8 button pad | ||
| + | *** 12 pin 0.1" pitch header, right angle, mounts on bottom of board | ||
* 49x49mm card | * 49x49mm card | ||
* 4-40 mounting holes | * 4-40 mounting holes | ||
Revision as of 08:30, 21 August 2022
Contents
JOYPAD
- 8 Pushbutton Switches
- Up/Down/Left/Right/Center fire/3 others
- Two build options
- Build as either 5 button Atari Joystick compatible pad
- DB-9
- Build as 8 button pad
- 12 pin 0.1" pitch header, right angle, mounts on bottom of board
- Build as either 5 button Atari Joystick compatible pad
- 49x49mm card
- 4-40 mounting holes
Connectors
J1 - 12-Pin connector
- Right angle header on rear of card
J2 - DB-9 connector
- Built as an Atari JoyStick with DB-9 Female mounted below board
3D Image with DB-9 (Rev 1)
Application Example
- PicoVGA01 card with JOYPAD
- JOYPAD configured as Atari Joystick
- Male-to-Female DB-9 1:1 cable
Versions
Rev 2
- Change soldermask color to Black
- Moved DB-9 fire (pin 6) from Upper Right button to Fire button
- Changed to DB-9 Female
- Moved pullup resistors to the rear of the card in center of pushbutton footprints
- Shown with header for ribbon cable
Rev 1
- Works as-is
