Difference between revisions of "ER-PROTO-02 Rev 1 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 19: | Line 19: | ||
[[FILE:ER-PROTO-02-DB_FRONT_REAR_CAD.png]] | [[FILE:ER-PROTO-02-DB_FRONT_REAR_CAD.png]] | ||
| + | |||
| + | * J8 = 2x10 male header | ||
| + | * J7 = 2x8 male header | ||
| + | * J9 = 2x5 or 2x8 IDC box header | ||
| + | ** 2x5 if no +5V is used | ||
| + | ** 2x8 if +5V is used | ||
Revision as of 14:16, 24 November 2022
- Three card set
- Front panel
- Controls card
- Prototyping Daughtercard
Controls Card
- J1-J6 PJ366ST (stereo) or PJ368SM (Top, tip switch)
- RV1-RV6 = pots
- R1-R6 are series resistors for pots RV1-RV6
- R7, R9, R11, R13, R15, R17: Tip resistors
- R8, R10, R12, R14, R16, R18: Ring/Switch resistors
- J7 = 2X8 Female Header
- J8 = 2x10 Female Header
Prototyping Daughtercard
- J8 = 2x10 male header
- J7 = 2x8 male header
- J9 = 2x5 or 2x8 IDC box header
- 2x5 if no +5V is used
- 2x8 if +5V is used
