Difference between revisions of "PDP-8 Front Panel Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (→Notes) |
Blwikiadmin (talk | contribs) |
||
| Line 33: | Line 33: | ||
| 21 | | 21 | ||
| Res, 10K, 1/4W | | Res, 10K, 1/4W | ||
| − | | R20-R41 | + | | R20, R22-R41 |
| | | | ||
| 14 | | 14 | ||
Latest revision as of 11:34, 24 June 2024
Parts List
| Qty | Value | RefDes | Qty | Value | RefDes | |
|---|---|---|---|---|---|---|
| 19 | LED, 5mm, Orange
(Note 1) |
D1-D19 | 1 | Header, Rt Angle, 0.1", 2x25 | J1 | |
| 19 | Res, 1K, 1/4W
(Note 2) |
R1-R19 | 7 | Switch, Pushbutton, 6mm
(Note 3) |
SW10-SW16 | |
| 21 | Res, 10K, 1/4W | R20, R22-R41 | 14 | Slide Switch, SS12D00G3
(ebay) (amazon) (NOTE 4) |
SW1-SW9,SW17-SW21 |
Notes
- Select LED color. I used orange clear LEDS but orange diffused body LEDs are better since clear LEDs reflect background light.
- LED ballast resistor. I used 1K because modern LEDs are really efficient and can get uncomfortably bright with higher current. Vcc is 3.3V, Orange LED drops ~1.8V. Leaves 1.4V across resistor. Equals 1.4 mA with 1K resistor.
- Pick whatever height button you like. I used 9mm tall which is pretty tall but it's what I had sitting around.
- 0.1" pins. Select either SS12D00G3 3 pin slide switch or 3 pin headers.
