Difference between revisions of "I2C-RPT"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
| Line 23: | Line 23: | ||
== Drivers/Example Code == | == Drivers/Example Code == | ||
| − | * [[https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CRPT01 | + | * [[https://github.com/land-boards/lb-Arduino-Code/tree/master/libraries/LandBoards_I2CRPT01 GitHub Repo]] |
== Assembly Sheet == | == Assembly Sheet == | ||
* [[I2C-RPT-01 Assembly Sheet]] | * [[I2C-RPT-01 Assembly Sheet]] | ||
Revision as of 00:19, 30 December 2019
Features
- I2C Hub / Repeater / Replicator / Multiplexer / De-multiplexer
- Four I2C Ports
- Host port Controlled via I2C
- PCA9544A IC Multiple vendors
- 3.3V or 5V host operation
- 3.3V or 5V slave ports operation
- Voltage translation between the ports
- Example: A Raspberry PI which runs 3.3V can control an I2C device which runs at 5V
- Interrupt line on each channel and host
- 100KHz/400KHz operation
- On-board termination resistors
- 49x49mm form factor
- 4 solid 4-40 mounting holes
- Arduino driver and example code
- Raspberry Pi example code
