JOYPAD

JOYPAD

• 8 Pushbutton Switches
  • Up/Down/Left/Right/Center fire/3 others
• Two build options
  • Build as 5 button Atari Joystick compatible pad
    • DB-9 female
  • Build as 8 button pad
    • 12 pin 0.1" pitch header, right angle, mounts on bottom of board
• 49x49mm card
• 4-40 mounting holes

Connectors

J1 - 12-Pin connector

• Right angle header on rear of card
• Can use 1x10 header
  • Ignore pins 1, 12

J2 - DB-9 connector

• Built as an Atari JoyStick with DB-9 Female mounted below board
• Rev 1 board requires jumper wire

DB-9 (Rev 2)

Application Example

• PicoVGA01 card with Rev 1 JOYPAD
  • JOYPAD configured as Atari Joystick
• Male-to-Female DB-9 1:1 cable

Versions

Rev 2

• Change soldermask color to Black
• Moved DB-9 fire (pin 6) from Upper Right button to Fire button
• Changed to DB-9 Female

• Moved pullup resistors to the rear of the card in center of pushbutton footprints
• Shown with header for ribbon cable

Rev 1

• Works as-is

Assembly Sheet

• JOYPAD Rev 1 Assembly Sheet