ER-PROTO-02 Rev 1 Assembly Sheet

From Land Boards Wiki
Revision as of 15:41, 24 November 2022 by Blwikiadmin (talk | contribs) (→‎Prototyping Daughtercard)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
  • Three card set
    • Front panel
    • Controls card
    • Prototyping Daughtercard

Controls Card

ER-PROTO-02-CTLS FRONT REAR CAD.png

  • J1-J6 PJ366ST (stereo) or PJ368SM (Top, tip switch)
  • RV1-RV6 = pots
  • R1-R6 are series resistors for pots RV1-RV6
  • R7, R9, R11, R13, R15, R17: Tip resistors
  • R8, R10, R12, R14, R16, R18: Ring/Switch resistors
  • J7 = 2X8 Female Header
  • J8 = 2x10 Female Header

Prototyping Daughtercard

ER-PROTO-02-DB FRONT REAR CAD.png

  • J8 = 2x10 male header
  • J7 = 2x8 male header
  • J9 = 2x5 or 2x8 IDC box header
    • 2x5 if no +5V is used
    • 2x8 if +5V is used
  • R1, R2: 10 Ohms
  • D1, D2: Schottky Diodes
  • R1, R2, C1, C2

ER-PROTO-02-DB R1R2C1C2.PNG

Retrieved from "http://land-boards.com/blwiki/index.php?title=ER-PROTO-02_Rev_1_Assembly_Sheet&oldid=22513"