Benchtop Power Supply DPS3005

Benchtop Power Supply

Triple output
- Adjustable 0-30V
  - Using DPS3005 and Meanwell LRS-200-36
- Fixed 5V, 5A
  - Using Meanwell RS-25-5
- Fixed 3.3V, 6A
  - Using Meanwell RS-25-3.3
Case YaeCCC Rectangle Project Enclosure Case Electric Junction Box Blue
- 9.8" x 7.5" x 4.3"
Fanless?
AC power connector C14 with switch
Tight fit in enclosure
- 3.3V and 5V power supplied are mounted on their side

Input voltage range: 6.00-40.00V
- Uses 36V from the Meanwell LRS-200-36 AC/DC power supply
Output voltage range: 0V-32.00V
Output current: 0-5.000A
Output power range: 0-160.0W
Product Weight: about 113g
Product Dimension: 79*43*48(mm) (L*W*H)
Opening size: 71mm*39mm
Output voltage resolution: 0.01V
Output current resolution: 0.001A
Output Voltage accuracy: ± (0.5% + 3 digits)
Output Current accuracy: ± (0.5% + 5 digit)

Output Voltage-Channel 1: 36 VDC
Output Power: 212.4 W
Open Frame/Enclosed: Enclosed
Input Voltage switch selectable
- Switch must be set to operate
- Mine came set to 230V and it didn't "work" until the switch was set to 110V
- Switch is on side facing out in my installation - remove front panel to set
AC/DC input
- 90 VAC to 132 VAC
- 180 VAC to 264 VAC
- 240 VDC to 370 VDC
Output Current-Channel 1: 5.9 A
Mounting Style: Chassis
Length: 215 mm
Width: 115 mm
Height: 30 mm
Mouser
Datasheet

Would be good to add caps on the binding posts to suppress switching HF noise components
- Gets messy with leaded parts
Binding post spacing 0.75" (niminal)
- Might be some slop due to hole drilling slop
- Use "horizontally" elongated holes for binding posts
Use ceramic caps
- Pads for 3x of 0805 SMT
- Good values 0.1uF, 0.01uF, 0.001uF
- Pads for 1x of 1210 SMT
- Good value 10uF
Connect to card with up to 12 AWG wire
- Alternately 4-40 screws