Difference between pages "EP2C5-DB-TH Rev 1 Assembly Sheet" and "Multicomp in a Box"
(Difference between pages)
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) |
Blwikiadmin (talk | contribs) |
||
Line 1: | Line 1: | ||
− | + | == Features == | |
− | + | * Multicomp - FPGA retrocomputers | |
+ | ** 6502 | ||
+ | *** OSI BASIC | ||
+ | *** UK101 / OSI C1P | ||
+ | ** 6800 | ||
+ | *** MIKBUG | ||
+ | ** 6809 | ||
+ | *** BASIC | ||
+ | *** Beal Crook Multiple OS | ||
+ | ** Z80 | ||
+ | *** MPM (various CP/M builds) | ||
+ | * MC60000 | ||
+ | ** Teeside 2 | ||
− | * | + | == Enclosure == |
+ | |||
+ | * [https://www.amazon.com/gp/product/B07SW4RQBQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 YaeCCC Rectangle Project Enclosure Case Electric Junction Box Blue 170mm x 130mm x 80mm / 6.4" x 4.3" x 2.7"] | ||
+ | |||
+ | [[FILE:YaeCCC_CASE.PNG]] | ||
+ | |||
+ | == Card Set == | ||
+ | |||
+ | * [[RETRO-EP4CE15]] FPGA Baseboard | ||
+ | * [[QM Tech Cyclone V FPGA Board]] | ||
+ | * [[SD CARD X49]] | ||
+ | * [[SWLEDX8|Slide switches card]] - Using 4 slide switches | ||
+ | * [[PD01|Power Distribution card]] | ||
+ | * [https://www.ebay.com/sch/i.html?_odkw=usb+blaster&_sop=15&LH_BIN=1&LH_FS=1&_osacat=0&_from=R40&_trksid=p2045573.m570.l1311.R2.TR6.TRC1.A0.H1.TRS1&_nkw=usb+blaster+altera&_sacat=0 USB Blaster] - Remove from case - Opening in enclosure to access USB connector | ||
+ | |||
+ | === QM Tech Cyclone V FPGA Board Features === | ||
+ | |||
+ | * [[QM Tech Cyclone V FPGA Board]] | ||
+ | * [https://www.aliexpress.com/item/1000006622149.html?spm=a2g0s.9042311.0.0.3e1f4c4dZLO3HX QMTECH Altera Intel FPGA Core Board Cyclone V CycloneV 5CEFA2F23 SDRAM] | ||
+ | ** [https://github.com/ChinaQMTECH/CYCLONE_IV_EP4CE15 QMTECH GitHub page] | ||
+ | ** On-Board FPGA: [https://www.mouser.com/ProductDetail/Intel-Altera/5CEFA2F23I7N?qs=w%252BhYR4jzwbaH%2F206ysv4kw%3D%3D 5CEFA2F23I7N] | ||
+ | ** On-Board FPGA external crystal frequency: 50MHz | ||
+ | ** 5CEFA2F23 has rich RAM resource up to 1,760Kb | ||
+ | ** 5CEFA2F23 has 25K logic cells | ||
+ | ** On-Board Micron [https://www.mouser.com/ProductDetail/Micron/MT25QL128ABB8ESF-0AUT?qs=wUXugUrL1qwVHvCLqhzg7w%3D%3D MT25QL128A] SPI Flash, 16M bytes for user configuration code | ||
+ | ** On-Board Winbond 32MB SDRAM, [https://www.mouser.com/ProductDetail/Winbond/W9825G6KH-6?qs=qSfuJ%252Bfl%2Fd4uj%2FIr3zKOng%3D%3D W9825G6KH-6] | ||
+ | ** On-Board 3.3V power supply for FPGA by using MP2315 wide input range DC/DC | ||
+ | ** 5CEFA2F23 core board has two 64p, 2.54mm pitch headers for extending 108 user IOs. All 108 user IOs are precisely designed with length matching | ||
+ | ** 5CEFA2F23 core board has 3 user switches | ||
+ | ** 5CEFA2F23 core board has 2 user LEDs | ||
+ | ** 5CEFA2F23 core board has JTAG interface, by using 10p, 2.54mm pitch header | ||
+ | ** 5CEFA2F23 core board PCB size is: 6.7cm x 8.4cm | ||
+ | ** Default power source for board is: 1A@5V DC, the DC header type: DC-050, 5.5mmx2.1mm | ||
+ | |||
+ | == Power == | ||
+ | |||
+ | * 5V Power comes from the USB | ||
+ | * 3.3V regulator on the [[RETRO-EP4CE15]] Card | ||
+ | ** H2 pins 2-3 shorted on the [[RETRO-EP4CE15]] card | ||
+ | ** Set to route 3.3V to the I/O connector | ||
+ | |||
+ | == Cabling == | ||
+ | |||
+ | === SD Card === | ||
+ | |||
+ | * [[SD_CARD_X49|SD Card]] | ||
+ | * Install J3 on SD Card | ||
+ | ** Runs card off 3.3V | ||
{| class="wikitable" | {| class="wikitable" | ||
− | ! | + | ! J1 PIN |
− | ! | + | ! SIGNAL |
− | ! | + | ! COLOR |
− | ! | + | ! SD PIN |
− | ! | + | ! FPGA Pin |
− | ! | + | ! DIR |
− | |||
|- | |- | ||
| 2 | | 2 | ||
− | | | + | | 3.3V |
− | | | + | | ORG |
− | | | + | | 7 |
− | | | + | | VREG 3.3V |
− | | | + | | OUT (PWR) |
− | |||
|- | |- | ||
− | | | + | | 45 |
− | | | + | | sdSCLK |
− | | | + | | GRY |
− | | | + | | 3 |
− | | | + | | L19 |
− | | | + | | OUT |
− | |||
|- | |- | ||
− | | | + | | 46 |
− | | | + | | sdMISO |
− | + | | BLU | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | | | ||
| 2 | | 2 | ||
− | | | + | | L18 |
− | | | + | | IN |
|- | |- | ||
− | | | + | | 47 |
− | | | + | | sdMOSI |
− | | | + | | WHT |
− | | | + | | 4 |
− | | | + | | L22 |
− | | | + | | OUT |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
− | | | + | | 48 |
− | | | + | | sdCS |
− | | | + | | VIO |
− | | | + | | 5 |
− | | | + | | M22 |
− | | | + | | OUT |
− | |||
|- | |- | ||
− | | | + | | 49 |
− | | | + | | GND |
− | | | + | | GRN |
− | |||
| 1 | | 1 | ||
− | | | + | | GND |
− | + | | OUT (PWR) | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
|- | |- | ||
|} | |} | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− |
Revision as of 15:38, 13 February 2022
Contents
Features
- Multicomp - FPGA retrocomputers
- 6502
- OSI BASIC
- UK101 / OSI C1P
- 6800
- MIKBUG
- 6809
- BASIC
- Beal Crook Multiple OS
- Z80
- MPM (various CP/M builds)
- 6502
- MC60000
- Teeside 2
Enclosure
Card Set
- RETRO-EP4CE15 FPGA Baseboard
- QM Tech Cyclone V FPGA Board
- SD CARD X49
- Slide switches card - Using 4 slide switches
- Power Distribution card
- USB Blaster - Remove from case - Opening in enclosure to access USB connector
QM Tech Cyclone V FPGA Board Features
- QM Tech Cyclone V FPGA Board
- QMTECH Altera Intel FPGA Core Board Cyclone V CycloneV 5CEFA2F23 SDRAM
- QMTECH GitHub page
- On-Board FPGA: 5CEFA2F23I7N
- On-Board FPGA external crystal frequency: 50MHz
- 5CEFA2F23 has rich RAM resource up to 1,760Kb
- 5CEFA2F23 has 25K logic cells
- On-Board Micron MT25QL128A SPI Flash, 16M bytes for user configuration code
- On-Board Winbond 32MB SDRAM, W9825G6KH-6
- On-Board 3.3V power supply for FPGA by using MP2315 wide input range DC/DC
- 5CEFA2F23 core board has two 64p, 2.54mm pitch headers for extending 108 user IOs. All 108 user IOs are precisely designed with length matching
- 5CEFA2F23 core board has 3 user switches
- 5CEFA2F23 core board has 2 user LEDs
- 5CEFA2F23 core board has JTAG interface, by using 10p, 2.54mm pitch header
- 5CEFA2F23 core board PCB size is: 6.7cm x 8.4cm
- Default power source for board is: 1A@5V DC, the DC header type: DC-050, 5.5mmx2.1mm
Power
- 5V Power comes from the USB
- 3.3V regulator on the RETRO-EP4CE15 Card
- H2 pins 2-3 shorted on the RETRO-EP4CE15 card
- Set to route 3.3V to the I/O connector
Cabling
SD Card
- SD Card
- Install J3 on SD Card
- Runs card off 3.3V
J1 PIN | SIGNAL | COLOR | SD PIN | FPGA Pin | DIR |
---|---|---|---|---|---|
2 | 3.3V | ORG | 7 | VREG 3.3V | OUT (PWR) |
45 | sdSCLK | GRY | 3 | L19 | OUT |
46 | sdMISO | BLU | 2 | L18 | IN |
47 | sdMOSI | WHT | 4 | L22 | OUT |
48 | sdCS | VIO | 5 | M22 | OUT |
49 | GND | GRN | 1 | GND | OUT (PWR) |