Features
- Daughtercard to ER-PROTO-02 card
- Uses Front Panel and Controls card
- Controls card populated as required
- Arduino NANO
- High Def Sound output
- Up to 6 Pots connected to A/D inputs
- Up to 4 input jacks connected to A/D inputs
- Options
- 0-4 Pots, 0-4 Input Jacks
- 5 Pots, 0-3 Input Jacks
- 6 Pots, 0-2 Input Jacks
Arduino Pins
A0 - Analog Input 0
- RV1 wiper, 0-5V
- Install jumpers on controls card to pull up/down lines to pots
A1 - Analog Input 1
A2 - Analog Input 2
A3 - Analog Input 3
- J1 input Jack, 0-5V if jack is plugged into J1
- RV4 wiper if no jack is plugged into J1
A4 - Analog Input 4
- J2 input Jack, 0-5V if jack is plugged into J2
- RV5 wiper if no jack is plugged into J2
A5 - Analog Input 5
- J3 input Jack, 0-5V if jack is plugged into J3
- RV6 wiper if no jack is plugged into J3
A6 - Analog Input 6
- J4 Jack, 0-5V
- Could be either input or output
A7 - Analog Input 7
- J5 Jack, 0-5V
- Could be either input or output
D9, D10 - High Def Audio Out
- J6 - Stereo 3.5mm jack (PJ-366ST)
- Same output on both stereo channel
J9 - Eurorack Power
J10 - Digital I/O
- D0/RX
- D1/TX
- D6
- D7
- D8
- D9
- D10
- D11
- D12
- D13
- +5V
- GND
Software / Example Projects
Assembly Sheet
ER-MOZZI-DB Rev 1 Assembly Sheet