Difference between revisions of "ER-PROTO-02 Rev 1 Assembly Sheet"

From Land Boards Wiki
Jump to navigation Jump to search
 
(3 intermediate revisions by the same user not shown)
Line 19: Line 19:
  
 
[[FILE:ER-PROTO-02-DB_FRONT_REAR_CAD.png]]
 
[[FILE:ER-PROTO-02-DB_FRONT_REAR_CAD.png]]
 +
 +
* J8 = 2x10 male header
 +
* J7 = 2x8 male header
 +
* J9 = 2x5 or 2x8 IDC box header
 +
** 2x5 if no +5V is used
 +
** 2x8 if +5V is used
 +
* R1, R2: 10 Ohms
 +
* D1, D2: Schottky Diodes
 +
* R1, R2, C1, C2
 +
 +
[[FILE:ER-PROTO-02-DB_R1R2C1C2.PNG]]

Latest revision as of 15:41, 24 November 2022

  • Three card set
    • Front panel
    • Controls card
    • Prototyping Daughtercard

Controls Card

ER-PROTO-02-CTLS FRONT REAR CAD.png

  • J1-J6 PJ366ST (stereo) or PJ368SM (Top, tip switch)
  • RV1-RV6 = pots
  • R1-R6 are series resistors for pots RV1-RV6
  • R7, R9, R11, R13, R15, R17: Tip resistors
  • R8, R10, R12, R14, R16, R18: Ring/Switch resistors
  • J7 = 2X8 Female Header
  • J8 = 2x10 Female Header

Prototyping Daughtercard

ER-PROTO-02-DB FRONT REAR CAD.png

  • J8 = 2x10 male header
  • J7 = 2x8 male header
  • J9 = 2x5 or 2x8 IDC box header
    • 2x5 if no +5V is used
    • 2x8 if +5V is used
  • R1, R2: 10 Ohms
  • D1, D2: Schottky Diodes
  • R1, R2, C1, C2

ER-PROTO-02-DB R1R2C1C2.PNG