Difference between revisions of "JOYPAD"

From Land Boards Wiki
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 64: Line 64:
  
 
== Versions ==
 
== Versions ==
 +
 +
=== Rev 3 ===
 +
 +
* Add connection to Upper left button pin 7
 +
** MSX joystick compatible
 +
* Add wire to Rev 2 board
 +
** J1-10 to DB-9 pin 7
  
 
=== Rev 2 ===
 
=== Rev 2 ===

Latest revision as of 12:31, 21 August 2022

JOYPAD Rev2 P18578-720pxV.jpg

JOYPAD

  • 8 Pushbutton Switches
    • Up/Down/Left/Right/Center fire/3 others
  • Two build options
    • Build as 5 button Atari Joystick compatible pad
      • DB-9 female
    • Build as 8 button pad
      • 12 pin 0.1" pitch header, right angle, mounts on bottom of board
  • 49x49mm card
  • 4-40 mounting holes

Connectors

JOYPAD-CAD.png

J1 - 12-Pin connector

JOYPAD J1 HDR12.PNG

  • Right angle header on rear of card
  • Can use 1x10 header
    • Ignore pins 1, 12

JoyPad DB-9 REV2 REAR Header-3D.png

J2 - DB-9 connector

JOYPAD J2 DB-9M.PNG

  • Built as an Atari JoyStick with DB-9 Female mounted below board
  • Rev 1 board requires jumper wire

JOYPAD P18502-720pxV.jpg

DB-9 (Rev 2)

JOYPAD Rev2 P18578-720pxV.jpg

Application Examples

Rev 2 JOYPAD as 5 Button "Atari" style

  • PicoVGA01 card with Rev 2 JOYPAD
    • JOYPAD configured as Atari Joystick
  • Can be extended with Male-to-Female DB-9 1:1 cable
  • PicoVGA01 and JOYPAD with 4-40 standoffs

PicoVGA01 JOYPAD-Rev2 P18581-720px.jpg

Rev 1 JOYPAD as 5 Button Atari Joystick

  • PicoVGA01 card with Rev 1 JOYPAD
    • JOYPAD configured as Atari Joystick
  • Male-to-Female DB-9 1:1 cable

PicoVGA JOYPAD P18499-720px.jpg

Rev 1 JOYPAD with Ribbon Connector

P1826-CROPPED-720PX.jpg

Versions

Rev 3

  • Add connection to Upper left button pin 7
    • MSX joystick compatible
  • Add wire to Rev 2 board
    • J1-10 to DB-9 pin 7

Rev 2

  • Change soldermask color to Black
  • Moved DB-9 fire (pin 6) from Upper Right button to Fire button
  • Changed to DB-9 Female with top mount

JoyPad DB-9 REV2 FRONT.png

  • Moved pullup resistors to the rear of the card in center of pushbutton footprints
  • Shown with header for ribbon cable

JoyPad DB-9 REV2 REAR Header-3D.png

Rev 1

  • Works as-is

Assembly Sheet