Difference between revisions of "PiPicoMite01 Rev1 Assembly Sheet"
Jump to navigation
Jump to search
Blwikiadmin (talk | contribs) (Created page with "file:PicoMite01_Rev1_CAD.PNG == Parts List == {| class="wikitable" ! Find ! Qty ! Ref Des ! Part Number ! ! Find ! Qty ! Ref Des ! Part Number |- | 1 | 1 | U3 | [https:...") |
Blwikiadmin (talk | contribs) |
||
| Line 1: | Line 1: | ||
| + | [[file:PicoMite01_Rev2_CAD.PNG]] | ||
| + | |||
[[file:PicoMite01_Rev1_CAD.PNG]] | [[file:PicoMite01_Rev1_CAD.PNG]] | ||
| Line 154: | Line 156: | ||
|- | |- | ||
|} | |} | ||
| + | |||
| + | |||
| + | == Notes == | ||
| + | |||
| + | # Can use 1N400x in place of Schottky diode at D1/D2 location | ||
| + | # DC can be provided via header pins on J4 so J2 can be omitted | ||
| + | # U2 socket is optional | ||
| + | # Install shunts at H1, J2 as required per wiki page | ||
Revision as of 17:11, 29 May 2022
Parts List
| Find | Qty | Ref Des | Part Number | Find | Qty | Ref Des | Part Number | |
|---|---|---|---|---|---|---|---|---|
| 1 | 1 | U3 | TXS0104 | 15 | 1 | J1 | Header, Vert, 1x2 | |
| 2 | 6 | R1, R2, R10, R11, R13, R14 | 2.2K (1/8W) | 16 | 1 | J4 | Header, Vert, 2x3 | |
| 3 | 2 | R3, R4 | 270 (1/8W) | 17 | 1 | J6 | Header, Vert, 2x8 | |
| 4 | 1 | R5 | 18 | 1 | J9 | Header, Vert, 2x10 | ||
| 5 | 2 | R6, R8 | 47 (1/8W) | 19 | 1 | J11 | Header, Rt Angle, 1x4 | |
| 6 | 1 | R7 | 820 (1/8W) | 20 | 1 | H1 | Header, Vert, 2x2 | |
| 7 | 2 | R9, R12 | 1K (1/8W) | 21 | 2 | J3, J5 | Socket, Female. 1x20 | |
| 8 | 2 | R15, R16 | 10K (1/8W) | 22 | 1 | J7 | AudioJack3, SJ1-3523N | |
| 9 | 4 | C1, C2, C3, C4 | 0.1uF | 23 | 1 | J8 | PS2_DIN6 | |
| 10 | 2 | C5, C6 | 47nF | 24 | 1 | J10 | CONN, DB15HD, BLUE (VGA) | |
| 11 | 2 | C7, C8 | 47uF | 25 | 1 | J2 | USB-B | |
| 12 | 1 | D1 | 1N5819 | 26 | 1 | U1 | RPi-PICO | |
| 13 | 1 | D2 | MBR0520T1H | 27 | 1 | U2 | MCP23017_SP | |
| 14 | 1 | SD1 | Conn, SD Card |
Notes
- Can use 1N400x in place of Schottky diode at D1/D2 location
- DC can be provided via header pins on J4 so J2 can be omitted
- U2 socket is optional
- Install shunts at H1, J2 as required per wiki page
