Difference between revisions of "Z80 in 3 Chips"

From Land Boards Wiki
Jump to navigation Jump to search
Line 173: Line 173:
 
* Mount additional drives using mount command
 
* Mount additional drives using mount command
 
* M: drive is a 892KB RAMSISK
 
* M: drive is a 892KB RAMSISK
 +
* Additional Volumes
 +
** Inspired by mc-2g-1024 original but modified
 +
** [https://obsolescence.wixsite.com/obsolescence/multicomp-fpga-cpm-demo-disk Sources from here]
 +
** Mount using mount d vol
 +
*** Ex: mount b: 9 will mount ZCPR3 Utilities A-O as drive b:
 +
** Volume.008 - ?
 +
** Volume.009 - [https://github.com/douggilliland/MultiComp/blob/master/MultiComp_On_RETRO-EP4CE15/Multicomp-MPM/ZCPR3_Utilities_A_O.txt ZCPR3 Utilities A-O]
 +
** Volume.010 - [https://github.com/douggilliland/MultiComp/blob/master/MultiComp_On_RETRO-EP4CE15/Multicomp-MPM/ZCPR3_Utilities_P_Z.txt ZCPR3 Utilities P-Z]
 +
** Volume.011 - [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/Wordstar_3.3_Reference_Manual_1983.pdf Wordstar], [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/dBASE_II_Users_Guide_Feb83.pdf DBase], SuperCal
 +
** Volume.012 - Games
 +
** Volume.013 - [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/MuMath_and_MuSimp_1980_Soft_Warehouse_text.pdf MuMath]
 +
** Volume.014 - Documentation
 +
** Volume.015 - Languages ([https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/TURBO_Pascal_Reference_Manual_CPM_Version_3_Dec88.pdf TurboPascal], [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/Microsoft_FORTRAN-80_Ver3.4_Users_Manual_Nov80.pdf Fortran], [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/BBC%20Basic%20(Z80).pdf BBC  BASIC])
 +
** Volume.016 - Languages ([https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/Algol%20M%20Language%20Description.pdf Algol], [https://github.com/douggilliland/Retro-Computers/blob/master/Z80/Software/Manuals/Aztec_C_1.06_User_Manual_Mar84.pdf Aztec C], APL, PLI, FORTH)
 +
** Volume.017 - Languages (BDS Tiny C, Janis Ada15, MS COBOL, PILOT)
 +
** Volume.018-253 - User volumes
  
 
==== Z80 BASIC Ver 4.7b ====
 
==== Z80 BASIC Ver 4.7b ====

Revision as of 21:46, 6 September 2022

Features

Z80 P865-cropped-720px.jpg

  • Z80
    • 12.5 MHz operation
  • 512KB SRAM
  • PSoC5LP
    • Z80_PSoC Datasheet - generated from PSoC Creator
    • PSoC5 LP emulates standard Z80 peripheral chips
      • Serial port with USB
    • Memory Management Unit (MMU)
      • Controls 512KB SRAM
    • Loader moves EPROM code to SRAM
    • Controls CPU reset
  • Optional MCP23017 16-bit port expander
    • I2C Addresses 0x24
  • Optional Front Panel
    • I2C Addresses 0x20-0x23
  • SPI interface for SDHC card

Stackup (top to bottom)

Z80 PSOC P936-CROPPED-720PX.jpg

Connectors

H1 - I2C Interface

  • Connects to Front Panel Card via I2C

Conn H1.PNG

H2 - ISP Download

  • Connects to PSoC programmer

Conn H2.PNG

H3- Serial Port or SPI (SD Card)

Conn H3.PNG

H4 - I/O

Conn H4.PNG

J1 - USB B

  • 5V card Power
  • USB to Serial comm port

J2, J3 - I/O Ports

  • J3 connects to JOYPAD on GPA connector

Conn J2 J3.PNG

J4 - Audio Out

  • DAC is the Analog function generator in the PSoC

Conn J4.PNG

J5 - Z80 Signals

  • Useful for monitoring the CPU lines

Conn J5.PNG

Software

  • Hardware/Software options are set in the PSoC "Hardware_Config.h" file

Front Panel

EightBitFrontPanel720px.JPG

  • Card boots into Front Panel Control
  • SRAM can be examined/changed in SRAM from the Front Panel
  • Options to run Z80 or PSoC Monitor
    • Upper right (SW32) = Increment address, read
    • SW31 = Store data, increment address, read data
    • SW30 = Load Address, read memory
    • SW29 = TBD
    • SW28 = TBD
    • SW27 = TBD
    • SW26 = Run Monitor
    • SW25 = Run Z80

Z80_PSoC Monitor

Z80 PSoC Monitor.PNG

  • Type to check the SD card
R4000
  • Result:

Z80 PSoC Monitor D Command.PNG

Multiboot Multicomp (MULTIBOOT_CPM)

  • CP/M Multiboot - Runs MultiComp 512KB SRAM version
  • Insert "M/CPM 512KB" SD card
  • Insert USB B cable
  • Run PuTTY
    • 115,200 baud
  • Card will power up and cycle through all the LEDs on the Front Panel
  • Press SW25 (upper left button) on Front Panel For 8 Bit Computers to run Multiboot software
  • PuTTY will display
Press [SPACE] to activate console
  • Press SPACE
  • Press H for help menu
>
  Available Commands:

  :ccxxxxiibbbbbb       Load Intel-Hex file record
  Rxxxx         Run from address xxxx
  Sddd          System boot
  Iddd          Init: Format directory
  Pddd[,xxxx]   PutSys: write system image[,loadaddress]
                (No address: re-use last loadaddress)
  Gddd[,xxxx]   GetSys: load system track

  Dxxxx[,yyyy]  Dump memory from xxxx [,to yyyy]
                D (no address) shows next block
  Cxxxx         Change/show memory at xxxx
                CR advances "," quits

  ddd is a decimal volume number,
  xxxx, yyyy is a hexadecimal address.
  Leading zeros may be omitted.
  ESC or ^C aborts.

Z80 BASIC Ver 4.7b

Running Grants Code scaled.png

Reference Designs

Hackaday Page

Videos

Assembly Sheet

Retrieved from "http://land-boards.com/blwiki/index.php?title=Z80_in_3_Chips&oldid=19647"